Model Number: EPL01-E-#8085 Brand Name: nibbe Key Specifications/Special Features: Explosion-proof light2. Applicable place This explosion-proof LED flameproof enclosures conforming to the world standards of electrical equipment in explosive atmospheres and equipment protection by flameproof enclosures “d”Its explosion-proof marking is Ex dⅡC T43. Characteristics(1) High efficiency LED module is adopted as light source and most advanced electrical technology is appliedThis enables low power consumption, efficient light-emitting and instant lighting at the same time
(2) Light has unique structure; simple and compact but ideal for heat diffusion (patented), tight enough for sealing (waterproof and dust prevention of IP66) and tough against shocks and corrosions
This assures long service life of the light
(3) By unique optical design, light irradiation range is wide and illumination intensity is high
(4) There are various mounting options and mounting is very easy


5. Attentions
(1) Before mounting and use of the light, read through this instructions and check whether voltage of power source conforms to that required for the light
If not, it may cause breakdown of the light and there may be case that you should choose a differently rated light
(2) Make surface of the light case and lens clean to ensure light transmittance and heat diffusion
(3) Be careful not to have the light case contacted to hard materials in order to avoid scratches
(4) Do not let amateur mount the light, professional personnel
(5) Never neglect to ground the light, it is important to ensure security of power source and protection from lightening surge of the light
(6) Ambient temperature for the light should be in the range from -50 to 40°C
Make forceful ventilation to accelerate heat diffusion when necessary
(7) Repairs and maintenance

1. Check periodically elasticity of sealing materials
2. In case they lose elasticity due to aging, replace them with those of exactly same specifications (both size and hardness)
3. Alternative materials may not be used
4. Conduct periodically insulation resistance test with 500V mugger so that insulation resistance does not get lower than 2mΩ
5. In maintenance work, take care of the surface of flameproof enclosures
6. As the surface may not have damages and corrosion, it was coated with rust-proof oil 204-1 in assembly
7. Do not soil the surface or damage the sealed part

(8) Lamp has emergency box with battery inside, emergency box has 2 cables and one of the cable is for power and the other is for switch

6 Cautions
In all installation, repairs, maintenance and other works, it is required to cut off power before the works
Do not open the lamp