Send inquiry
Waterproof Fish Rod Heat Shrink Sleeving 1000x35mm
Technical Parameters
| Product Type | Heat shrink tube |
| Material | PE |
| Flame retardant | VW-1 |
| Operation Temperature | -40℃-125℃ |
| Withstand Voltage | 600V |
| Shrink ratio | 2:1 |
| Water absorption | <0.2% |
| Shrinking temperature | 75-125℃ |
| Usage | Low Voltage,Sport equipment, fishing tool etc |
Introduction:
It is made from co-extrusion of polyvinyl and hot-melt adhesive, suitable for various electric insulation and bonding of cables and connectors, widely applied for connecting or end-handling, electric wire, corrosion-proof of metallic rods or tubes and antenna protection.
Detailed Images
|
Non-Slip Heat Shrink Tube Specification Table | |||||
|
Standard Specific |
Inner diameter before shrink(mm) |
Inner diameter after shrink(mm) |
Standard Package (meter/piece) | ||
| Inner diameter | Average thickness | Maximum inner diameter | Average thickness | ||
| Φ15mm | ≥15 | 0.45±0.15 | 8 | 0.85±0.15 | 1m/pcs 1.6m/pcs |
| Φ20mm | ≥20 | 0.50±0.15 | 11 | 0.90±0.15 | 1m/pcs 1.6m/pcs |
| Φ22mm | ≥22 | 0.50±0.15 | 12.5 | 0.90±0.15 | 1m/pcs 1.6m/pcs |
| Φ25mm | ≥25 | 0.50±0.15 | 14.5 | 1.00±0.15 | 1m/pcs 1.6m/pcs |
| Φ28mm | ≥28 | 0.50±0.15 | 15.5 | 1.00±0.15 | 1m/pcs 1.6m/pcs |
| Φ30mm | ≥30 | 0.60±0.15 | 17.5 | 1.20±0.15 | 1m/pcs 1.6m/pcs |
| Φ35mm | ≥35 | 0.60±0.15 | 20 | 1.20±0.15 | 1m/pcs 1.6m/pcs |
| Φ40mm | ≥40 | 0.60±0.15 | 23 | 1.20±0.15 | 1m/pcs 1.6m/pcs |
| Φ45mm | ≥45 | 0.65±0.15 | 25 | 1.25±0.15 | 1m/pcs 1.6m/pcs |
| Φ50mm | ≥50 | 0.65±0.15 | 28 | 1.25±0.15 | 1m/pcs 1.6m/pcs |
If you need customized / special sizes, please to send an inquire to us. We will respond you in 24 hours.
http://www.gh-material.com/